All prices are in CAD
Your shopping cart is currently empty.
Godin xtSA Lightburst Flame Guitar
This item is temporarily out of stock, but is available to purchase. Most orders will ship in approximately 10-14 days. If shipping will be longer than 14 days we will contact you with an expected date.
Price:
$2,579.00
A jack-of-all-trades and master of all of them, the Canadian made xtSA’s incredible sound power begins with three distinct voices: electric guitar, acoustic guitar, and synth.
The xtSA delivers big-time electric sounds via the Godin humbucker-single-humbucker pickup configuration and thanks to a special 5-way switch setup, extra meaty humbucker tones co-exist with glassy split-coil sounds in the second and forth positions. Turn down the electric output and raise the volume on the RMC transducer saddles and the xtSA becomes an incredibly authentic-sounding ‘acoustic’ guitar. The acoustic voice of the xtSA is enhanced by an onboard preamp with a three-way graphic EQ. The two outputs are set up so that the electric and acoustic voices can be blended while using a single patch cord or at the amp/mixer via both outputs. Also, the xtSA’s synth tracking, which simply put, is the best in the business.
As with all of Godin synth-ready instruments, a built-in 13-pin connector provides direct access to all Roland™ GR-Series synths as well as most other 13-pin devices. All of this sound power would be a lot less interesting if the guitar didn’t feel great but the xtSA sure does, thanks to the same 25½” scale and mahogany neck used on the Godin LGX-SA flagship guitar. The Richlite® fingerboard is shaped with Godin’s ergocut technique and equipped with medium jumbo frets. The body is made of a silver leaf maple center with poplar wings and is topped with a Premium grade veneer of highly figured Koa.
Specs
Body: Silver Leaf Maple Center with Poplar Wings
Top: Premium grade Figured Maple
Neck: Mahogany
Fingerboard: Richlite
Fingerboard Radius: 16" (406.4 mm)
Scale Length: 25.5" (647.7 mm)
Nut Width: 1.6875" (42.8625 mm)
Graphtech Nut
22 Frets
Machine Head Ratio: 18:1
Neck & Bridge Pickups: Custom Godin humbucker
Middle Pickup: Godin Single Coil
Floating Tremolo Bridge
Bridge Electronics: acoustic output, Tremolo Bridge with RMC transducer saddles and 13-pin output
Controls: 3 Outputs : electric, Acoustic, Custom Pre-amp with 3-band EQ, mix, Synth Volume, Tone, Volume
High Gloss Finish
Gig Bag included
The xtSA delivers big-time electric sounds via the Godin humbucker-single-humbucker pickup configuration and thanks to a special 5-way switch setup, extra meaty humbucker tones co-exist with glassy split-coil sounds in the second and forth positions. Turn down the electric output and raise the volume on the RMC transducer saddles and the xtSA becomes an incredibly authentic-sounding ‘acoustic’ guitar. The acoustic voice of the xtSA is enhanced by an onboard preamp with a three-way graphic EQ. The two outputs are set up so that the electric and acoustic voices can be blended while using a single patch cord or at the amp/mixer via both outputs. Also, the xtSA’s synth tracking, which simply put, is the best in the business.
As with all of Godin synth-ready instruments, a built-in 13-pin connector provides direct access to all Roland™ GR-Series synths as well as most other 13-pin devices. All of this sound power would be a lot less interesting if the guitar didn’t feel great but the xtSA sure does, thanks to the same 25½” scale and mahogany neck used on the Godin LGX-SA flagship guitar. The Richlite® fingerboard is shaped with Godin’s ergocut technique and equipped with medium jumbo frets. The body is made of a silver leaf maple center with poplar wings and is topped with a Premium grade veneer of highly figured Koa.
Specs
| Model: | 028672 |
| Manufacturer: | Godin |
SKU:
ae00-5420^028672
Manufacturer Part #:
028672
Customer Reviews
