Your shopping cart is currently empty.
Browne Amplification Unit 13 Dual Distortion
Manufacturer: Browne Amplification
Model #: UNIT-13
Price:
$521.00 (CAD)
This item is temporarily out of stock, but is available to purchase. Most orders will ship in approximately 10-14 days. If shipping will be longer than 14 days we will contact you with an expected date.
Description
The Browne Amplification Unit 13 is a dual overdrive and distortion built on classic American distortion circuits. Both sides share the same core circuit, but each one is voiced for its own job: the left side for low gain, the right side for high gain. Together they cover everything from a light, gritty edge to a full-on wall of distortion.
The low-gain side tames the drive range so the whole sweep of the Drive knob stays useful at lower settings, and a 3-way Low End switch puts back the bottom end that classic distortion circuits tend to lose when the gain is turned down. The high-gain side pushes the same circuit harder for a more aggressive response, with a 2-way switch that chooses between two hard-clipping diode flavours.
An internal DIP switch sets the footswitching. Use it like Browne's other dual pedals, with a switch for each side, or choose the new A/B mode: the left switch turns the whole pedal on and off, and the right switch flips between the two sides. In A/B mode you can pick a side while the pedal is bypassed, and the LED for that side glows at half brightness so you always know which sound is waiting.
Features
- Two-in-one overdrive/distortion: a low-gain side and a high-gain side
- Independent Level, Drive and Tone controls on each side
- 3-way Low End switch on the low-gain side
- 2-way clipping diode switch on the high-gain side
- Standard dual-pedal switching or A/B channel mode, set by internal DIP switch
- True-bypass soft switching
- Top-mounted input, output and power jacks
- Folded aluminum enclosure
Specs
Controls: Level, Drive, Tone (each side); Low End 3-way (left); Clipping 2-way (right)Switching: True-bypass soft switching; standard or A/B mode
Jacks: Top-mounted input, output and DC
Power: Standard 9V DC
| Model: | UNIT-13 |
| Manufacturer: | Browne Amplification |
