Mark Bass CMD 102P V 300W 2x10 Bass Combo
Description
TheMarkbass CMD 102P V Bass Combo Amplifier integrates the updated Little Mark 58R head into a front-ported, tilt-back wedge enclosure to deliver clear low-end punch and significant stage versatility. Operating at 300W RMS through its dual internal 10-inch neodymium speakers and single piezo tweeter, the system expands to a full 500W RMS when combined with an external 8-ohm cabinet. The physical cabinet architecture allows the combo to serve natively in a standard vertical arrangement or tilt backward as an angled floor monitor.
The updated configuration consolidates all primary controls and audio connections onto the front panel for streamlined on-stage management. Tone shaping is driven by an interactive 4-band equalizer, an Old School high-frequency filter, and a dedicated 3-way rotary switch for instantly swapping between Flat, Scooped, and Footswitch-controlled response curves. Safety and dynamic threshold protection are handled by an onboard, high-speed bi-band limiter circuit.
Please note: In-store pickup only, contact us for a shipping quote if outside the lower mainland.
Instrument Specifications
- Amplifier Type: Solid State / Class D Power Stage
- Power Output: 300W RMS @ 8 Ohms (Internal Speakers) / 500W RMS @ 4 Ohms (With Extension Cabinet)
- Speaker Configuration: 2 x 10-inch Neodymium Custom Cones
- High Frequency Driver: Piezo Tweeter
- Cabinet Port Design: Front Bass Reflex System
- Cabinet Form Factor: Dual-Angle Wedge (Vertical Stack or Floor Monitor)
- Frequency Response: 40 Hz to 18 kHz
- Crossover Frequency: 3.5 kHz
- Maximum SPL Sensitivity: 101 dB
- Nominal Impedance: 8 Ohms
- Equalization: 4-Band EQ (Low, Mid Low, Mid High, High)
- Tone Filters: Continuous Old School Filter
- Character Switching: 3-Way Selector Switch (Flat / Scooped-Mid / FSW Footswitch Mode)
- Dynamic Control: Integrated Bi-Band Limiter
- Front Panel Inputs: 1/4-inch Instrument Jack, Mute Toggle Switch
- Audio Outputs: Balanced XLR DI Out (with Pre/Post EQ and Ground Lift Switches), 1/4-inch FX Loop Send/Return, 1/4-inch Tuner Out
- Rear Connections: Neutrik SpeakON / 1/4-inch Combo Speaker Out, AC Power Input Socket
- Physical Dimensions: 23.03 x 18.5 x 18.7 inches (58.5 x 47 x 47.5 cm)
- Net Weight: 38.58 lbs (17.5 kg)
| Model: | CMD102P-V |
| Manufacturer: | Mark Bass |
Specifications
Bass Amplifiers




